The ALNESS is one of our Freestanding Four Post Lifts, which can be used for vehicle maintenance as well as parking cars. If you are looking for a Parking Lift that can be moved around your building as and when you require, then look no further. The Alness features a mobility kit and the ability of not having to fix it to the floor, making it versatile and agile. The vehicle raises up to a maximum height of 1800mm, giving a clearance underneath of 1685mm with manual lock release. (There is a taller version available too.)
Whilst built along the lines of the classic 4 post design, this differs as it is a Free standing four post design. The outstanding feature is a strong cross-beam wrap-around post design to give it strength and stability. Without the requirement of fixing it into concrete, it permits a wider range of substructures to be used, sites with poor quality or thin concrete, or it is ideal if you have underfloor heating or electrical cables within the floor.
The car ramp can have its motor pump unit mounted on the the front right post or the back left post. There are a number of infill options that can be fitted between the runways, the best one will depend on whether you intend to use the lift for maintenance or not. Heavy metal drip takes might be useful, but if you’re having to lift them on and off every day, they can be a chore.
|Dimensions||4.2 × 0.6 × 1.1 m|
Tool / jack tray – this can be used to lift your vehicle’s wheels off the platforms when used with a bottle jack or car jack. The tray can be used for your tools whilst working on your car, so you have everything to hand. It also comes with a drain plug, so you can catch fluids and safely drain them. The jacking tray is rated to 1.0T, however if you are after the ‘real thing’ then opt for our scissor jacking beam as an optional extra.
Aluminium lightweight up-ramp set – these are removable and can be stored on the lift platforms, ensuring no extra floor space is taken up.
Drip tray set – includes three plastic drip trays that can be positioned within the platform gap to prevent drips from falling onto the car parked under the platform.
Mobility kit – allows for the lift to be moved around your building floor. The lift must not have cars on when you are wanting to use the mobility kit. We recommend a two-man operation when moving the lift over your level concrete floor.
How does the manual lock release work?
The locks are simply disengaged by the lever on the end of the cross beam when you want to bring the lift down.
Are the extra accessories including in the price?
Yes, all the accessories are included in the price of the Alness. This includes the mobility kit, jacking tray, drip tray set and aluminum up-ramp set. The price also includes VAT.
How much ceiling height do I need?
To ensure you have enough ceiling height to store two vehicles in the parking space of one, the rule of thumb is to measure the total height of the two vehicles that you would like to store and then add 320mm. This will give you the minimum ceiling height required.
Does this lift come with a warranty?
This lift comes with a 12 month component parts warranty. There is no on-site call out warranty implied with this lift. The warranty can be increased to 24 months for an additional £150.
Is the Alness fully CE compliant?
Yes, the Alness is fully CE compliant with safety low voltage 24v push-button controls on the panel.
Can I install a free standing four post lift myself?
This lift does require an element of installation. Please ensure that you have the relevant knowledge and experience in installing garage equipment prior to purchase. If you do not have experience, then please ask us for a quotation to install the lift for you. We offer an installation service, so you can rest assured that your lift will be installed correctly.
Total width: 2870mm
Total width between posts: 2350mm
Total width between pulleys: 1914mm (car entry at tyre height)
Width of platforms: 456mm
Width between platforms: 894mm
Total length including up-ramps: 5196mm
Total length excluding up-ramps: 4290mm
Length of platforms: 3985mm
Total height: 2412mm
Maximum lifting height: 1800mm (to top of platform)
Lifting capacity: 4000kg
Lifting time: 56s
Platform thickness: 110mm
Toe protection under platform: 16mm
Power supply: 240V single phase @ 16A
Circuit breaker required: 16A, C or D rated circuit breaker
Gross weight of unit: 940kg
Infill panels – Option to choose from Aluminium checker plate or galvanised steel wave slats. The Infill panels replace the drip trays to provide a solid platform deck. For load bearing choose the galvanised steel slat option. Please note the aluminium checker plate option is sourced from our factory only.
Jacking Beam – The jacking beam is a great addition as it provides a means for the axle to be lifted, providing a wheel off platform. This enables you to carry out many more inspection and maintenance tasks. Our jacking beam comes with 3 mechanical locking positions that allows you to leave the car in the air for a period of time. Rubber block set included. Tech sheet: jacking beam